Increasing TAS in Modern Day Fighters with Expandable Wing Tips

As fighter aircraft get faster and faster there is a diminishing return on more aerodynamic streamlining in designs. You can only build the aircraft so "Aerodynamically Correct" once you have the best optimum design for speed, there is little you can do without changing the aircraft in-flight or the air itself. Of course both of those possibilities have been and are being looked at. Let's think on the many types of fighter aircraft, which change their configurations in-flight. You have the F-8 Crusader which changed its angle of attack in-flight so it could land at slower speeds, while achieving very high speeds in flight. The F-111 and the F-14 Tomcat both have wings which sweep back in flight as the airspeed increases. Many newer fighter designs have "thrust vectoring nozzles" to help them with maneuverability and quick turns, well that is as long as the pilot can take the additional "G's" without passing out or imploding. The new JSF, B-1 Bomber and other fighters like the F-117 can store their munitions inside the aircraft so they are not hanging out there causing incessant parasite drag or adding to the extremely low radar signatures needed to maintain a stealth configuration. Many fighters will have additional drop tanks for extra fuel, which once used up are dropped. Once dropped the aircraft can then have additional maneuverability and shed the extra drag hanging below. Designers and engineers, even pilots have often thought of ways to redesign the fastest and best performing aircraft in the modern era.

I propose another modification, a simpler one, which can achieve these types of increases while using very little weight. Recently an F-15 had a mishap, I believe a mid-air collision in which all of its right wing was tore off. The plane it hit both pilots ejected, however the F-15 is a tough bird with a lot of thrust and it was still under control by its pilot. The pilot and navigator/weapons co-pilot could not see the wing was gone, only a fire ball along side. They decided to fly the aircraft in and did so successfully; how can this be? Well they landed at a high airspeed and maintained control with the thrust of the aircraft. Once an aircraft travels above 450 Knots the fuselage starts flying. The fighters we have today like the F-18 Hornet (Navy) and the F-16 Talon, F-15 Eagle (Air Force) have substantial fuselages which act as wings. Therefore at higher speeds the actual wings which stick out considerably on the aircraft are simply not needed and actually impede the aircrafts top True Air Speed (TAS). So lets eliminate them once airborne and up to speed. Of course we cannot just drop them like the "drop tanks" as that is a very costly part of the modern day fighter. Besides if the wings fall off and then you have to come back an land you would have to land at a very high rate of speed like those brave boys in the F-15 missing on very important right wing from the jet intake outward; what a story, quite ballsy indeed. In my modification I propose an expandable wing spar to fold outward to various positions, perhaps two or three. Straight out, 26 degrees and 45 degrees, behind this fold out spar would be a webbing of strong inflatable polymer rubbery material made of partially MMM Manufactured material memory substances. The webbing would come out and then inflate using the jet engines ram air before take off. This hot air would cause the material memory to have increased camber for the take off configuration, a fat wing. As the aircraft accelerated the hot air would be replaced with cooler air, ram air from the ambient temperature. At 450 to 500 Knots the wing would fold back to 26-degree and then at 550 to 600 Knots fold back to 45-degrees. As the aircraft approached the speed of sound it would be completely retracted. As the webbing retracts it would run thru a roller system allowing it to take up very little space, as the area it retracts into will also hold fuel tanks and space would be limited. As the folding spar comes back it would provide an end-cap covering the system as well as a small gate or strake on the protruding fuselage/wing tip. Without the wing on the aircraft efficiency would occur in less drag, meaning higher speeds, better range and fuel economy.

We seem to be reaching the top end of aerodynamic design in an atmosphere in modern day fighters. We are at the point that it is getting difficult to design an aircraft much faster. So we either need some new radical designs, change the air itself or further modify the aircraft in flight to better maintain efficiencies at each airspeed, altitude and stage of flight. Lighter and stronger materials are now coming online, how we choose to use them will be crucial in maintaining air superiority. If you are an aircraft designer please be thinking here, thank you.

"Lance Winslow" - If you have innovative thoughts and unique perspectives, come think with Lance; www.WorldThinkTank.net/wttbbs

---

Airbus A-380 is Pretty Big

You know the Airbus A-380 is so huge it takes... Read More

Cleaning Air Cargo Containers

If you own a pressure washing business, janitorial service or... Read More

Point to Point VS Spoke and Hub? Air Taxi

Boeing it is said took a big gamble in predicting... Read More

Fighter Jet Trainers Sport Planes

You want a fighter jet as your personal aircraft; do... Read More

Automated Following Jump System for Paratroopers, AFJS

There are many problems of safety in paratrooper drops. Many... Read More

Flying Blimp Walrus Could Have Assisted in Evacuations

What is a Walrus Super Blimp? It is a giant... Read More

Mirrors to Redirect Mini Laser Weapons on Fighters for Vortex Airflows

Recently a new airborne laser system was announced to be... Read More

Travel Tips:Tips for Safer flying

Flying can be an adventure, but like everything else in... Read More

Really Cheap Airline Tickets

When you're looking for airline tickets to your specific destination,... Read More

I Am Afraid Of Flying; You Are Not Getting Me A Light Plane

Boy I have heard it all from my friends. I... Read More

Mexico to Manufacture Aircraft

It appears Mexico with its 120 million population is considering... Read More

Tips to Finding Really Cheap Airline Tickets

Finding really cheap airline tickets onlineLooking for a really good... Read More

General Aviation Manufacturing is in the Tank; Hang On It is Going to Get Worse

Change is a constant, Outsourcing Jobs, Capital flows, Emerging Markets... Read More

FAA Intervention in Privatized Space Flight is Ridiculous

Burt Rutan and his team of designers, engineers and test... Read More

Secrets to Finding Really Cheap Airline Tickets Online

Knowing where to find really cheap airline tickets is the... Read More

Fuselage Mounted Laser Vortex Enhancer Directed to Airfoils

DARPA has developed a small laser cannon, just like Star... Read More

Flying As A Hobby

Ask a room full of people what hobby they have... Read More

Private Jets: 4 Leaders in Fractional Flying

Fractional flying, you say. Is that division? Well, sort of.... Read More

A380 Bathrooms

Bathroom seat with a view; That's right! The all-new A-380... Read More

Aluminum Cleaner for Aircraft Detailing by Alcoa

There are many choices for aircraft detailing when it comes... Read More

Cheap Airline Tickets! With Internet Access, The Skies The Limit For Great Deals

With easy access to the Internet, the convenience of finding... Read More

Helicopters Outfitted With Airbags

You know those airbags in your car? Did you know... Read More

The Wright Brothers

Orville and Wilbur Wright were mere bicycle mechanics, yet they... Read More

Business Aviation Networking Notes

The process of finding out about a job, getting interviewed,... Read More

Static Electricity to Flap UAV Material Memory Wings

How can we keep aircraft and UAVs aloft longer and... Read More

Young Men Trying to Imitate the 9-11 Scenario, Part IV

In conclusion of this young man who crashed a single... Read More

Overcoming Jet Lag

Jet lag can be one of the worst, and certainly... Read More

Making a Mechanical Manta with Material Memory Manufacturing Methods

I propose building a mechanical manta ray as a Underwater... Read More

Downed Pilots Hibernating From the Enemy

When we watch Oliver North's "War Stories" or the "Wings... Read More

Airport Noise Reduction

Do you live near an airport and cannot stand the... Read More

Entering Business Aviation, Part V: Tips on Finding Work

I will not pretend that this is the easiest topic... Read More

Airline Fuel Costs Mount

The airlines are huge users of fuel. Fuel costs are... Read More

Entering Business Aviation, Part III: Training Options

Time for some training! So, you are not sure what... Read More