How Body Piercing Works -- The Ins and Outs of this Cutting Edge Process

Body piercing (defined as any piercing beyond the standard earlobe piercing) has become such a popular form of body modification that between five and ten percent of the population of the United States has indulged in at least one form of it at some time in their lives. In most cases, once a person gets a body piercing, they follow the first one with more. There are lots of considerations; however, for making sure that your body piercing is done safely so that you don't end up with either an infection or a poorly done piercing that could leave an unsightly scar.

It ain't ear piercing, honey?

The procedure for a good body piercing isn't the same is for getting your earlobes pierced. Most earlobe piercings that you see done in a mall or jewelry store involve using a piercing gun that quickly shoots the actual earring post through the earlobe. This may be fine for an area of the body that has soft tissue and is easily pierced, but it isn't a good idea for other parts of the body for a few reasons.

First, it isn't as accurate as a needle, so lining it up won't always work. Just as with any gun, there is a recoil that will make the aim inaccurate. Second, the force of the gun will cause bruising and damage to the skin that isn't necessary and will slow the healing process. Third, a piercing gun can't be sterilized completely, so there is a higher risk of infection. The message is clear ?- never get a body piercing done with a piercing gun. Always go to a professional who follows procedures approved by the Association of Professional Piercers (APP).

Once you get to the piercing parlor, there are several steps to the body piercing process that will take place to ensure both the success of the piercing and your health and safety. Each of these steps should be followed and nothing skipped.

Getting the preliminaries out of the way

You must be comfortable in the environment and comfortable with your piercer before moving ahead with anything. If he or she attempts to rush you through the procedure without answering your questions or putting you at ease, do not continue. This is a long-term commitment you are making, so it's up to you if you want to go through with it.

There is paperwork to be filled out, and don't let a piercing parlor tell you otherwise. A good piercing studio always keeps accurate records to ensure the health and safety of their clients. If there would ever be a question of contamination or some other health hazard, they must be able to contact you. If you are a minor, they must have the signature of your parent or guardian, who must be present at the time of the piercing.

Sterilization ?- the only route to safe body piercing

Sterilization is all-important in body piercing ?- the piercing area must be sterile, the piercer's hands must be sterile, the tools used must be sterile, and the piercing needle must be sterile.

A separate area for sterilization should be available in the piercing parlor where a steam heat autoclave is operational. The autoclave is the only approved sterilization device that can sufficiently heat tools such as forceps to a high enough temperature to kill all bacteria. Before beginning any piercing, all tools will be sterilized in an autoclave and laid out carefully on a clean tray. After this, they will not be touched until your piercing begins, and then only by your piercer when he has safely cleaned and gloved his hands, just as a surgeon would.

You can't be too clean

The piercing chair or table will also be cleaned, usually by being wiped down thoroughly with an antibacterial spray and disposable cloths or paper towels to prevent recontamination. You will not be allowed to enter and prepare for your piercing until the area has been prepped and sterilized.

The needles used for body piercing are sterile and individually packaged, and no reputable piercer will ever use a needle that has already been used once. When you are pierced, the sterile needle's package should be opened in your presence just before your piercing. The same is true of your starter jewelry -? it should be sealed in sterile packaging and only opened in your presence.

The piercer will wash his hands and wrists with an antibacterial liquid soap and dry them before donning disposable gloves. At this point, he will be ready to begin your piercing.

Prep work means straight piercings and fewer complications

With properly gloved hands, your piercer will first check the area you want pierced to determine if you are really a candidate for the type of body piercing you're seeking. In some cases, he may tell you that the conditions aren't appropriate.

For instance, if there is damage to the cartilage or heavy scarring in the area you want pierced. He will also tell you if you have a current cut or skin condition that means you should postpone piercing. If this is the case, in order to protect your health and prevent possible problems down the line, he will not go any farther with the procedure. If everything looks fine, he'll tell you so and you'll move on to the next step.

• He'll change to a fresh pair of gloves after having handled your skin to examine the area.
• He will clean the area to be pierced with an antibacterial solution.
• He will mark the area to be pierced with a sterile, disposable marker.
• You'll have the opportunity to check the marking (in a mirror if necessary) before he proceeds to the piercing stage.
• He will ask you if you are ready for the piercing procedure and allow you a moment to get comfortable.
• He will arrange his tools at hand and open the sterile package with the piercing needle.

And now, you're ready for the real deal ?- the piercing itself!

But first, a word about those piercing needles...

Piercing needles are not your average sewing needle or push-pin. Piercing needles are highly specialized and were designed specifically to pierce the flesh while causing the least amount of pain possible. They also help encourage faster and cleaner healing than a regular needle.

These needles also come in a variety of gauges suited for specific types of piercings. For instance, if you are getting a nipple pierced, the piercer will probably not want to use anything smaller than a 12 gauge (the smaller the gauge, the larger the needle), while a lip or nostril could be pierced with a 14 or 16 gauge. Thicker gauges prevent migration in areas prone to this movement of the jewelry, and prevent tear-out of piercings in more delicate flesh.

Piercing needles are made from surgical steel ?- the same material that hospital scalpels and lancets are made from. This ensures that they are biocompatible with all skin types and won't cause an allergic reaction. They are also extremely sharp because they are laser cut with precision edges so that they slice cleanly through the skin without tearing or pulling. The piercing needles are hollow rather than solid so that they actually cut a tiny hole through the skin being pierced rather than punching through the skin.

These hollow needles leave a clean-edged, precise hole in the flesh that will heal relatively quickly, while a regular needle (which is much duller by comparison) actually pushes its way through the skin, tearing and bruising the skin along the way.

This is why a professional piercing needle provides a much less painful piercing with minimal bruising, and is much safer and easier for your body.

The main event ?- the body piercing

The basic procedure is the same for most piercings, but all piercers have their own way of handling the process. Some piercers will clamp the area with forceps to stabilize the area before putting the needle through, while others prefer to use a steady hand and their own eyes to guide the needle. If the person being pierced seems like they may flinch, it is more likely the forceps or surgical pliers of some type will be used to steady the area and hold the skin in place. This doesn't hurt, and is simply to make sure you don't get a crooked placement.

When the needle is lined up with the marking, the piercer will ask one last time if you are ready, and then quickly push the needle through. Some piercers use a cork as a backing, others don't. This usually only takes a moment and feels like someone is pinching the skin hard. In most cases, the build-up to the moment is far worse than the actual piercing. Areas that are more sensitive include the genital area and the bridge of the nose.

Starter jewelry needs to be high quality

After the needle is removed, the starter jewelry is immediately put into place. One of the most important things to know about starter jewelry is that it is being put into an open wound, which is what a fresh piercing really is. Obviously, you don't want your starter jewelry to be something that can cause an allergic reaction or infection.

There are three materials recognized by professional piercers as acceptable for starter jewelry for their high quality, purity and their low incidence of allergic reactions:

• Surgical Steel
• Titanium
• 14K or 18K gold

Other materials are more likely to cause either an allergic reaction, rejection of the piercing by your body, or migration of the piercing.

Starter jewelry is generally a captive bead ring or barbell. The piercer will choose an appropriate size for the area that is slightly larger than what you would normally wear to allow for some swelling, which is normal for the first several days after a new piercing. He will screw the ends onto the new jewelry and make sure it is securely in place.

At this point, the piercer will remove this set of gloves and put on another fresh set, clean the area around the new piercing and examine it one last time. He will let you take a look at your new body jewelry while he explains the aftercare and any potential problems you should watch for. He will also give you a sheet of detailed aftercare instructions to take home with you.

Before you leave, take a few moments to relax either in the piercing room or the waiting room, as sometimes the adrenalin rush and its aftermath can leave you feeling a bit light-headed. Once you feel steady and sure of yourself, it is a good idea to get something like fruit juice to drink or a light snack. Your piercing is done!

What if I want to try body piercing myself?

If you love body modification, you may be considering piercing yourself. It's really not a good idea for a number of reasons. If you want to try piercing, do it the right way -- become a fully trained, licensed professional. Without the proper training and an understanding of proper sterilization techniques you risk scarring, infection, and permanent damage to the area.

Using makeshift piercing tools like sewing needles is also a great risk because they simply cannot be sterilized properly. Even heating over an open flame (such as a lighter) will not kill all bacteria. The only guaranteed way to kill all germs is with an autoclave or by using packaged, sterile surgical needles. Even then, the entire area and all tools must be sterilized properly.

If you are truly interested in piercing, consider it not as a hobby or a momentary activity but as a career. Becoming an apprentice at a piercing parlor means learning proper technique and learning a trade at the same time, combining your interests with a way to make a living.

An apprentice usually trains for at least a year under a licensed, professional piercer learning all aspects of sterilization, piercing and customer service. In many states they are also required to take courses in first aid, blood borne pathogens, anatomy and other Health and Safety standards and practices. You will observe piercings and work with the sterilization process for several months before actually doing any piercings, but when you do pierce you will be doing it properly and professionally. A good place to find out more information is through the Association of Professional Piercers' website at www.safepiercing.org.

This article on the "How Body Piercing Works" reprinted with permission.
Copyright 2004 Evaluseek Publishing.

About the Author:
Lori Wilkerson is a full-time freelance writer who loves her work because it gives her the opportunity to learn more about the world every day. Right now, she knows a little bit about almost everything, and a lot about body jewelry, nipple jewelry and temporary tattoos. She has two dogs who are spoiled and one teenager who is not.

---

Why Condition Your Boiler Water?

A boiler is used for generating steam. It does this... Read More

Hibernate Enemy with Gas Cloud

Scientists have discovered chemicals, which cause humans to go into... Read More

Shooting Down a UAV in Flight

Shooting Down an Enemy UAV so it cannot give away... Read More

Composite Materials in Ships, Pipelines, Liners and Aircraft

One future problem, which has not sufficiently been addressed, is... Read More

Global Dumbing?

I am beginning to wonder if scientists have been getting... Read More

Treating Chronic Mutational Hepatitis B with Chinese Medicine Vitalliver (Vigconic Suppositories)

Research Method:Quantitative determination by contrasting HBV-DNA of cases before and... Read More

Electromagnetic Energy in Meteorites - Theory

I have some friends who have the largest private meteor... Read More

Living In Arizona Boulders--Where Did They Come From?

When most people think of building a secluded home, they... Read More

Hyper Sound Wave Emissions to Quiet Helicopters

It is possible to disrupt the sound waves coming from... Read More

Locusts To Help Make Energy From Bio Waste, part III

If we bring the locusts to a feasting area of... Read More

Diamond Flashes

Beyond magnificence and splendor, the world of diamonds evolves on... Read More

Saving People in Disaster Crisis, Concept

So often when we see huge Natural Disasters there are... Read More

Cloaking a UAV in Flight

If you will recall the Klingon Space Craft and Warship... Read More

UAV Air-Breathing SAM Upgrade Recommendations

Can a hybrid Surface to Air Missile, UAV loiter for... Read More

How A Light Bulb Works and Other Interesting Tidbits

Light Bulb ScienceEver wonder how a light bulb works? I... Read More

Stem Cells (The Truth)

The much publicized stem cell research debate focusing on moral... Read More

Secrets of The Mathematical Symmetry of Nature and Patterns of Erosion

As scientists and theorists study patterns, design, chaos, complexity they... Read More

Brain Waves Activating to the Tune of a Different Drummer?

Well, here is a most interesting thought. There are many... Read More

DNA Profiling: Its Uses In Court

DNA Profiling and Its Uses in CourtStronger evidence in courtrooms-it's... Read More

Magnetic Propulsion for GI Joe?

Thought of the day. I talked to an old guy... Read More

Aerodynamics and Hydrodynamics of the Human Body, Birds, and Boeing

The aerodynamics of the human body are very interesting indeed.... Read More

Increasing Lightening Storm Intensity and Direction Control of Strikes

Using four UAVs in formation with one C-130 Hercules Aircraft... Read More

The Joy of Recycling

I have always been an advocate of recycling. Even though... Read More

Is Thought Evident in Plants?

Who would have thought that a plant could be a... Read More

UAV Defense, UAV Recovery, Material Research, Infected Birds with Virus Plastic Net

When Manufacturing nets of any type: Going for strength and... Read More

RFID Sensors to Protect Water Supplies

Recently the US Military has developed a special set of... Read More

Mars Surface Exploration and AFF

As we study more and more about Mars we know... Read More

Is Your Brain Really Necessary?

The reason for the apparently absurd question in the title... Read More

Chimpanzees and Humans a lot in common

Those who study chimpanzees are often amazed completely with the... Read More

Traffic Zoology

There is a secret zoo that runs encaged along the... Read More

Making Diamonds Using The Earth

We can make diamonds using the Earth's inner forces, extreme... Read More

MAV Propulsion and Testing

Perhaps we should be looking into advancing the propulsion systems... Read More

Space Travel - Human Innate Bonding to ELF ? Extremely Low Frequencies of Planet Earth

Human innate bonding to ELF ? Extremely Low Frequencies of... Read More