Testing Diode -The Accurate Way on How to Test Semiconductor Diode Using Multimeter

Testing diodes is different from testing a resistor because you need a skill to do it. If you do not know or wrongly test a diode you will be unable to repair the equipment. A bad diode you think it is good. This will definitely waste your precious time.

A rectifier diode can fail in one of the four ways. It can become:

-Open
-Shorted
-Leaky
-Breakdown when in full operating voltage

An analog multimeter or digital multimeter can be used to check for all the first three conditions except the last one where the diode breakdown in full operating voltage. From my of experienced in the electronic repairing line, i found that checking diode using analog multimeter is more accurate than using a digital multimeter. I could explain to you why i preferred analog meter. I do not know about you because i really came across quite a number of diodes where it checked ok using digital multimeter but failed when test with analog meter.

The first step on how to test a diode is to remove one of the diode lead. You can't always be certain if a diode is good or bad if you perform in-circuit test, because of back circuits through other components. To be absolutely sure, you will need to lift, or disconnect, one diode lead from the circuit to avoid back circuits. Unless you are very sure about the board you are checking. Sometimes i do found bad diodes when checking it on board. Your experienced will tell you when to check a diode on-board or off-board. If you are new to electronic repair, i highly recommend that you check a diode with a lead removed from the board.

I will set my analog meter to x1 ohms to check for current diode leakage reverse and forward testing. Connecting the black probe of your meter to the cathode and red probe to the anode, the diode is reverse biased and should look like an open reading. Connecting the red probe of your meter to the cathode and black probe to the anode, the diode is forward biased and the meter should read some value of resistance. If you have two readings then most probably the diode is shorted or leaky and you should replace it. If you don't get any reading either forward or reverse bias, the diode is considered open.

The real problem when checking a diode using the diode test function of a digital meter is that an open or leaky diode, the meter sometimes reads ok(0.6). This is due to digital meter diode test output voltage (which you can measure the output test probe using another meter) is around 500mv to 2v. An analog meter set to x1 ohms have output about 3V(remember the two 1.5V battery you installed in the meter!). The 3V voltage is enough to show you the accurate reading of a diode when under test.

Even if you have a good reading at x1 ohms doesn't mean that the diode is good . You now have to set your meter to x10K to test the diode again. The output voltage of x10k ohms is about 12V(remember the 9v battery in your meter-1.5v+1.5v+9v=12v). Again the diode under test should show only one reading. This is exception to Schottky diode where it have two readings but not shorted reading. If the meter showed one reading then the diode under test is good. If it has two readings then most probably the diode is either shorted or leaky. The digital meter can't test it because the output from the meter is only 500mv to 2V.

If a diode breakdown when under full operating voltage, there is no way to testing diode (unless you have a very expensive diode checker which specially designed to locate this type of problem).Substituting with a known good diode is often the only way to prove that an intermittent diode is causing a particular problem. Sometimes an intermittent diode could be locate using a coolant spray.

Caution: Be certain that power is removed from any circuit before performing any of the following diode checks, otherwise meter or circuit damage could result.

Conclusion-In order to correctly test diode function you need to set the analog meter to x1 ohms and x10K ohms range.

Jestine Yong is a electronic repairer and a writer. For more electronic repair information please visit his website at http://www.noahtec.com/electronic-repai r-articles.htm

---

Advanced Tips on Speeding Up Your PC

Other then keeping your HDD free of viruses, spyware, and... Read More

To Upgrade or Not?

To upgrade or not? That is the question. At least,... Read More

What is Blu-Ray DVD

Video technology has increased significantly over the past years, and... Read More

DVD Media

DVD is an optical disc storage media format that can... Read More

Laptop Security -Where?d My Laptop Go?

Laptops are lovely. They are convenient, mobile, powerful and prestigious.... Read More

Flash Your ATI Video Cards BIOS

Flash your ATI video card BIOS.You will need the following:1.... Read More

Your Printer Is Out Of Ink -- Now What?

We've all been there. You're in the middle of printing... Read More

Laptop and Notebook Theft Prevention

Laptops or Notebook computers are an expensive personal and business... Read More

Video Encryption

What is Video Encryption?Video Encryption is an extremely useful method... Read More

Easy to Execute!

Plug and play equipment or hardware solves the problem of... Read More

A Look Inside The Elusive Inkjet Industry

The Inkjet printer industry is booming. Office supply companies report... Read More

Understanding Transistor Data and Replacement

If, for some reason, you can't get an exact replacement... Read More

A Guide To Bar Code Reader Downloads

Bar code readers have proven themselves to be essential tools... Read More

The Printer Cartridge Review

Years ago computers were huge and their accompanying printers were... Read More

A Review of Refurbished Toshiba Laptops

Toshiba offers a few of their refurbished laptops in the... Read More

Choosing a Tape Drive

Tape drives remain the leading technology used by organizations for... Read More

How To Take Care Of Your Laptop Computer

As the proud owner of a laptop computer, you'll want... Read More

Computer Hardware Preventive Maintenance Software

Computers often break down at the worst of all times.... Read More

Ten Ways (plus 1) to Save on Printer Ink and Toner Cartridges

Are you getting tired of the high cost of printing?... Read More

How to Shop for Inkjet Printer Cartridges

Keeping Shipping Costs DownWhen shopping for inkjet printer cartridges online... Read More

All In One Printers ? Home Office Workhorses

All in one printers, also known as multifunction printers (MFPs),... Read More

Ink Cartridges & Printing - Poor Print Quality Solutions

Why are there faint areas or gaps in my print... Read More

DVD Recorders: Getting Started

IMO, these sd work 'like a VCR' as far as... Read More

Testing a Transformer- How To Accurately Test A Transformer

There is two types of transformers in the market- linear... Read More

Electronic Schematics Diagram-The Four Commonly Asked Questions

I came across quite a number of questions about electronic... Read More

Printer Cartridge Economics -- Four Ways To Make Your Ink Last Longer

Printer cartridge overheads can be a major expense for any... Read More

The Making of Energy Efficient Datacenters

The Crooked E: The Unshredded Truth About Enron is a... Read More

Video Cards: Is AGP Dead?

If you've been looking to upgrade your computer video card... Read More

What Is A Crystal? And How To Test It

Crystal are use to keep the frequency of the clock... Read More

Digital Camera Prints - Getting the Most for Your Money

Digital cameras have really taken off in popularity in recent... Read More

LCD Vs. CRT

When buying a new computer, or upgrading your monitor, you... Read More

Where does technology come from?

Ever wonder where all the cool gadgets come from? Ever... Read More

Can I Use My Old Ink With My New Printer?

The quick answer is...yes and no.Consider this. How many printer... Read More