Drilling Gemstones
What’s the purpose of drilling?
For one, you could create your very own jewelry for decoration and fashion. Drilling can enable you to mix and match or add up to your old and boring jewelries.
The basic and essential tip on drilling is practice. You could do it on ordinary stones or gems that are made of glass. Those are really cheap and you wouldn’t regret the moment you break it.
What you’ll need is a drill press and a drill bit.
The first thing that you should do is to determine the part of the gem you’ll put a hole into. You can do this by knowing where you’ll hang or mount your gem. You have to realize that every hole drilled within the gem lessens its integrity by adding flaws to its surface.
Next, you have to fill in a container full of water. Drilling in water is the easiest and most acceptable way to for drill bits to be wet. This wouldn’t be messy and wouldn’t give you a hard time collecting and disposing fallen debris. Drills have built-in cooling feature that drips away water.
Let the drill stay still perpendicularly with the stone. Make the correct angle because if your angle is a bit off the grid, you might cause a crack either at the exit or entry point. So be accurate.
Maintain an up and down movement gently. This will enable water to move under the bit. Don’t put so much hard pressure for this will cause knocking out the gemstone off the bit.
The advisable measurement for starters is to start drilling below an inch. This is highly recommended especially when dealing with softer gems. Furthermore, softer gemstones don’t require a diamond bit.
Now that’s all done, you could wipe away the particles around your gem and look at the drill made. If you found out that you made a clean drill, maybe you could start considering an entire course on manufacturing jewelries when passion strikes you. But other than that, you could now clean your gem and wipe it dry.
One popular drilling is laser drilling. This is usually applied to hard gemstones like diamonds. The materials used for this process differs from the ordinary drilling machine. You need a thin and strong laser beam and vacuum furnace. The purpose for this drilling is to remove the impurities that are seen in diamonds and generate clarity.
Bits of advice before, during and after the drilling process:
1. Do not compromise the quality and price of the drill. While alternative drills are quite cheap and is almost exactly the same result, you can’t gamble such precious gems. Precision of clear drilling isn’t assured therefore you’re gem is at risk.
2. Use glasses that will protect your eyes from flying particles when drilling.
3. If you’re too scared to drill a straight line, let the dealers do it.
Comments
Menu
My Articles
Gemstones And The Birthstones For Each MonthSemi Precious Gemstones: Facts And Information On Amber
Birthstones: Identifying Your Birthday Gemstones
Finding The Right Gemstones
Tips When Purchasing Gemstone Rings
Rare Gemstones: How Much Are They Worth
What Gemstones Are Mined In Israel?
Gemstones Made For Jewels
List Of Gemstones And How To Clean Them
Facts And Trivia About The Gemstone Turquoise
Drilling Gemstones
Fashionable Gemstone Beads
Gemstone Facts
Aquamarine Gemstones - March Birthstone
Bytownite: One Of The Rarest Gemstones
Caring For Japanese Gemstones
Meanings Of Some Semi Precious Gemstones
Purchasing Rhodonite Gemstones Online
Finding Wholesale Gemstones
All About Green Gemstones
Gemstones Shaped For The Heart
Identifying Gemstone Effects
Colored Gemstones Facts And Families
Four Precious Gemstones To Consider
Related Sites | My Articles Colored Gemstones Facts And Families Gemstones are very attractive even from afar. For women.. Fashionable Gemstone Beads When it comes to being fashionable, beads are so in. It is.. Four Precious Gemstones To Consider Precious gemstones are dazzling and stunning. You can find them in.. Rare Gemstones: How Much Are They Worth Not all gemstones are that easy to find. Some, you must go through.. |
|
|
Related News:
|